Pack 10x NI80 Fused Clapton Wotofo 0.28 ohm
CHF 6.00 VAT inc.
Pack 10x NI80 Fused Clapton Wotofo 0.28 ohm – Accuracy, responsiveness and dense vapor
A performance choice for rebuildable enthusiasts
In stock
- Booster calculator
Nicotine booster calculator for large format e-liquid or DIY base
Use our shortfill calculator! Enter the volume of your shortfill (in ml) and the number of boosters to add. Instantly get the total capacity (ml) and final nicotine level (mg/ml).+
Shortfill=
Booster
Result of your mixture0.00 - Delivery & Return
Delivery
Free delivery from CHF 50.-
For all orders below CHF 50, transport costs are borne by the buyer up to a fixed amount of CHF 9.90 .
Delivery time: Products will be delivered within a maximum of 24 working if the order is valid before 11 a.m. on the day of dispatch. Average delivery time: 24/48 hours .
Back
Return and Exchange
All products purchased on SHIFTERS can be exchanged free of charge or refunded within a maximum period of 14 days after the date of purchase.
Return address:
Shifters Lausanne, Shifters
after-sales service ,
Avenue de France 1
1004 Lausanne(Reimbursement of shipping costs by credit voucher up to CHF 9.00 depending on the material. Return costs due to an order error on the part of the buyer cannot be reimbursed.)
Pack 10x NI80 Fused Clapton Wotofo 0.28 ohm – Accuracy, responsiveness and dense vapor
A performance choice for rebuildable enthusiasts
Wotofo's 10-pack of NI80 Fused Clapton coils is designed for vapers looking for ready-to-use, reliable, and high-performing components for their rebuildable atomizers. These pre-made coils, carefully packaged, provide responsive heating, dense vapor production, and precise flavor delivery, all while eliminating the hassle of manually assembling complex wires.
With a resistance of 0.28 ohms per coil in single coil mode, these Fused Clapton coils are perfectly suited for a powerful and flavorful direct lung (DL) vape. Their Nichrome 80 construction offers a fast and even heat-up time, ideal for those who enjoy warm vapor and immediate flavor.
Technical structure of the Fused Clapton Wotofo coils
-
Type : Fused Clapton
-
Material : Nichrome 80 (Ni80)
-
Resistance : 0.28 ohm per coil in a single build
-
Number of coils : 10 units
-
Configuration : 2 x 26GA + 36GA
-
Internal diameter : 3 mm
-
Number of turns : usually 6
-
Usage : single or dual coil on a rebuildable deck
Each coil is rolled evenly and precisely, ensuring perfect compatibility with most RDA, RTA, or RDTA decks. Their standard 3mm diameter allows for smooth cotton wicking and optimal retention on the posts.
Advantages of Nichrome 80 (Ni80) wire
Ni80 is an alloy composed mainly of nickel and chromium, used for its very favorable thermal properties in vaping:
-
Rapid temperature rise : increased responsiveness for immediate heating
-
Low and stable resistance : perfect for sub-ohm builds
-
Uniform temperature : reduces the risk of hot spots
-
Lightweight material : less activation latency
-
No memory effect : ideal for light dry burns and cleaning
These properties make it one of the most used materials for advanced coils, especially Fused Clapton coils which require good thermal management.
Fused Clapton: design and benefits in vaping
A Fused Clapton coil consists of two parallel cores surrounded by a thinner wire that wraps around them in a tight spiral. This type of construction:
-
Multiplies the heating surface
-
Promotes even absorption of e-liquid
-
Offers a richer and more nuanced flavor reproduction
-
Produces dense vapor even at moderate power
-
Retains heat well without excessive temperature rise
Thanks to this structure, these coils are perfect for a vape that combines flavor and vapor, especially with e-liquids rich in vegetable glycerin.
Compatibility with rebuildable atomizers
The NI80 0.28 ohm Fused Clapton coils are compatible with:
-
RDA (double or single coil drippers)
-
RTA (atomizers with a tank, spacious deck recommended)
-
RDTA (drippers with integrated tank)
-
Electronic box mods accepting resistances below 0.3 ohms
-
Mech mods (only if Ohm's law is perfectly understood)
The 3mm diameter allows for smooth cotton wicking and quick installation on screw-on or clamp-on posts. In single-coil mode, the 0.28 ohm resistance is suitable for use between 35 and 50 watts. In dual-coil mode, the final resistance is approximately 0.14 ohms, ideal for a powerful and highly responsive vape.
Assembly and usage instructions
-
Break-in : Gently heat the coil without cotton to even out the temperature. Avoid repeatedly heating it to a bright red.
-
Cleaning : After a few tanks, scrape off any residue with a soft brush, then perform a light dry burn.
-
Wicking : Use dense cotton that fits snugly to the coil's internal diameter, without forcing it in.
-
Recommended power : between 35 and 55 watts depending on the setup and desired sound quality
It is essential to prime the cotton properly after installation to avoid dry hits. Good cotton saturation before the first puff ensures an optimal experience from the very first use.
Why choose the Fused Clapton Wotofo pack?
-
Reliable and consistent prefabricated coils
-
Fused Clapton design for an extended heating surface
-
Fast responsiveness thanks to the Ni80 wire
-
Precise flavor reproduction and dense vapor
-
Time saved on assembly
-
Compatible with most rebuildable decks
-
Ideal for single or double assemblies
-
Long lifespan with proper maintenance
Conclusion
The Wotofo 10x Fused Clapton NI80 0.28 ohm pack is an ideal solution for vapers seeking optimal performance without the complex process of coil building. Thanks to their meticulous design, responsiveness, and excellent flavor reproduction, these coils stand out as a practical, efficient, and long-lasting choice for a powerful and controlled direct-to-lung vape. A reliable choice for rebuildable enthusiasts looking for simplicity and performance.
| 5 |
|
0 |
| 4 |
|
0 |
| 3 |
|
0 |
| 2 |
|
0 |
| 1 |
|
0 |
Only logged in customers who have purchased this product may leave a review.
Related products
Drip Tip 510 Long Nautilus 2S – Aspire – The ideal tip for a precise, cold and pleasant MTL vape
An ergonomic solution for indirect inhalation enthusiasts
In stock
GeekVape Cutting Pliers – Precision and efficiency for rebuildable assemblies
In stock
Ceramic Tweezer – Thermal control and precision for rebuildable assembly
In stock
Fiber n'Cotton V2 – High-performance wicking for optimal results
A fiber designed for the demands of modern vaping
.
Out of stock
MXJO IMR 18650 3500 mAh 20A battery: reliable battery life and secure performance
A high-capacity battery for long-lasting vaping
Battery chargers here
Out of stock
Drip Tip 810 PVM0025 – Pimp My Vape – A stylish and efficient tip for your DL setups
A high-end accessory to enhance your direct vape
E-liquid bottle opener: the essential tool for vapers
The bottle opener is the simple, quick and effective solution for safely removing plastic tips
Use with:
Unicorn Bottle V3 120ml Chubby Gorilla
In stock



Comments
There are no reviews yet.