Fruity
Fresh fruity
Tobacco
Gourmand
Minty/Fresh
Drink
Sales
Booster calculator
Vape shops
Kit Pod Luxe Q2 Vaporesso
CHF 33.00 TVA inc.
Vaporesso offers its new Luxe Q2 pod!
This Luxe Q2 pod is equipped with a 1200 mAh internal battery, enough to vape all day without worrying about your pod's autonomy, and recharges in very little time thanks to its fast 2A charge via USB-C.
This simple, efficient pod has no buttons, so all you have to do is inhale to trigger the heating element, and enjoy your Luxe Q2 to the full! On the front of the pod, an LED shows you the remaining autonomy when you pull the trigger.
On the top of the Luxe Q2 pod is a disposable 3 ml mesh cartridge for e-liquid. Available in several wattages, 0.6 ohm for a more airy draw, 0.8 ohm or 1.0 ohm for a draw closer to a traditional cigarette, and will be able to accommodate e-liquids with nicotine salts!
Type of vape: Restrictive (MTL) resistance 0.8; 1.0 ohm.
Direct restrictive (RDL) resistance 0.6 ohm.
Recommended liquids per resistor :
1.0 ohm 50PG/50VG or VG lower than 50%.
0.6; 0.8 ohm 50PG/50VG or VG above 50%.
Compatible resistors: Luxe Q cartridges available in the "Resistors" section.
Kit contents :
1 Luxe Q2 Pod
1 Luxe Q 0.6 ohm cartridge
1 Luxe Q 1.0 ohm cartridge
1 USB-C cable
1 User manual
Vaporesso – Kit Pod Luxe Q2
Vaporesso propose son nouveau pod Luxe Q2 !
Ce pod Luxe Q2 est équipé d’une batterie interne de 1200 mAh, de quoi vapoter toute la journée sans se soucier de l’autonomie de votre pod, et qui se recharge en très peu de temps grâce à sa charge rapide 2A via USB-C.
Ce pod simple et efficace ne possède aucun bouton, il suffira s’aspirer pour déclancher la chauffe de la résistance, et de profiter pleinement de votre Luxe Q2 ! Sur la face avant une led vous indiquera l’autonomie restante lors du tirage.
Sur le haut du pod Luxe Q2 vient s’y clipser une cartouche mesh jetable de 3 ml de contenance d’e-liquide. Disponible en plusieurs puissance, 0.6 ohm pour un tirage plus aérien, 0.8 ohm ou 1.0 ohm pour un tirage plus proche d’une cigarette traditionnelle, et sera capable d’accueillir les e-liquides aux sels de nicotine !
Type de vape : Restrictive (MTL) résistance 0.8 ; 1.0 ohm.
Direct restrictive (RDL) résistance 0,6 ohm.
Recommended liquids per resistor :
1.0 ohm 50PG/50VG ou VG inférieur à 50%
0.6 ; 0.8 ohm 50PG/50VG ou VG supérieur à 50%
Résistances compatibles : Les cartouches Luxe Q disponible dans la rubrique « Résistances« .
Kit contents :
- 1 Pod Luxe Q2
- 1 Cartouche Luxe Q 0.6 ohm
- 1 Cartouche Luxe Q 1.0 ohm
- 1 USB-C cable
- 1 User's manual
Only logged-in customers who have purchased this product can leave a review.
Related products
Aspire offers an ultra-compact Pod that stands out for its intuitive operation!
The OBY is equipped with an integrated 500 mah battery that recharges via a USB-C port. Increasingly popular, this port recharges the Pod in less than an hour!
Devoid of any adjustment knobs, Aspire's OBY plays the simplicity card. There's no need to press a switch to trigger heating...
Out of stock
Geekvape once again brings us a sturdy, high-performance kit featuring the Aegis Max 2 box and the Zeus Sub Ohm 2021 clearomizer.
The essential Aegis Max 2 box continues to meet IP68 standards: unrivalled resistance to shock and water. The electronic mod is the best ally for mobile vapers.
GeekVape has come to present the new Aegis Max 2. Able to operate with a 3000 or 4000 Mah 18650 or 21700 battery (not supplied, but available to order in the "Accessories" section), this electronic mod takes up what has made all Aegis models so successful: a phenomenal 100 watts of power, an easy-to-read display, efficient ergonomics and rock-solid sturdiness!
Kiwi Vapor is back with the elegant, easy-to-use Spark Pod!
Tubular in shape, the Spark pod houses a 700 mAh internal battery, enough for all-day vaping.
On the top of the Spark pod sits a disposable Spark cartridge in 0.8 ohm or 1.2 ohm for those who prefer an MTL draw very close to that of a conventional cigarette, capable of holding up to 2 ml of e-liquid!
This little pod has no buttons, so all you have to do is inhale to trigger the heating element and get the most out of your Spark pod!
Type of vape: Restrictive (MTL): Spark cartridge 1.2 ohm (tight MTL draw) or 0.8 ohm (slightly airy MTL draw)
Recommended liquids per resistor :
0.8 Ohm 30PG/70VG to 50PG/50VG - (nicotine salts and high nicotine levels).
1.2 Ohm 40PG/60VG to 50PG/50VG - (nicotine salts and high nicotine levels).
Kit contents :
1 Spark Pod
1 cartridge 0.8 ohm
1 drip-tip
1 cotton filter
1 USB-C cable
1 user manual
His Majesty Innokin is back with the Sceptre 2, an improved version of his famous pod.
With its shiny, light-reflecting finish, the Sceptre 2 pod dazzles with its beauty. Sparkling like a jewel, this pod offers an unusual design that will appeal to users who like to vape in style! The choice is yours: it's available in 5 colors!
True to its prestigious lineage, the Sceptre 2 comes with a built-in 1400 mAh battery that can be recharged via its USB-C port.
Vaporesso delivers a futuristic pod with impressive performance.
The Luxe XR Max is a Pod with a generous 2800 mah battery. Thanks to this battery, Vaporesso's electronic cigarette can provide hours of uninterrupted vape pleasure. Equipped with the Axon Chipset, the Luxe XR Max can deliver a considerable 80 watts of power.
The Axon chipset in the Luxe XR Max Vaporesso is renowned for its responsiveness and reliability. The Pod also comes with a host of protective features: Vapers will be able to concentrate solely on the pleasure of vaping their favorite concoctions!
After the great success of the Wenax M1, Geekvape is back with a vengeance with the Wenax S3!
The tubular-shaped Wenax S3 this time houses an internal 1100 mAh battery, so you can vape all day long without worrying about autonomy! The pod is easy to handle and transport!
At the top of the Wenax S3 is a 2-ml disposable cartridge equipped with an integrated resistor available in 0.80 or 1.2 ohm. Refilling takes place on the side of the S cartridge. GeekVape has opted for an auto draw mode, so it couldn't be simpler: all you have to do is suck in to trigger the heating element!
The manufacturer also offers three power levels (max 18w). Three consecutive presses on the button at the bottom of the Wenax S3 allow you to select your power level.
Voopoo has come up with an even more compact Drag, thanks to a magnetic system for opening the cover and inserting the 18650 battery.
The Drag H80 S houses a Gen TT 2.0 chipset that delivers a maximum power output of 80 watts. This responsive chipset can also be used to select Eco, Smart or RBA modes: VOOPOO's Drag H80 S knows how to do absolutely everything!
On the top of this ecigarette, the manufacturer has placed a PNP II cartridge compatible with PNP resistors. Capable of holding up to 4.5 ml of e-liquid, this PNP II tank is top-fill.
Comments
There are currently no product reviews.