NI80 Vap'Extreme
CHF 8.00 TVA inc.
To meet all expectations, Vap'Extreme has launched its NI80 resistive thread. Less resistive than Kanthal A1, NI80 offers impressive responsiveness and longevity. Equally at home on a tank or a dripper, it will bring out the flavors of your favorite e-liquids to perfection!
Three versions of the NI80 are available:
24 Ga (0.51 mm). 30 feet (10 m) spool
26 Ga (0.4 mm). 30 feet (10 m) coil
28 Ga (0.32 mm). 30 feet (10 m) coil
- Booster calculator
Nicotine booster calculator for large format e-liquids or DIY bases
Use our shortfill calculator! Enter the volume of your shortfill (in ml) and the number of boosters to be added. Instantly get the total capacity (ml) and the final nicotine rate (mg/ml).ShortfillBoosterResult of your mix20.00 - Delivery & Returns
Delivery
FREE delivery for orders over CHF 50
For all orders under CHF 50, a fixed amount of CHF 9.90 will be charged for transport.
Delivery time: Products will be delivered within a maximum of 24 hours if the order is validated before 11am on the day of dispatch. Average delivery time: 24/48h.
Back
Returns and exchanges
All products purchased on SHIFTERS.CH can be exchanged free of charge or refunded within a maximum of 14 days from the date of purchase.
Return address :
Shifters Lausanne,
SAV Shifters,
Avenue de France 1
1004 Lausanne(Reimbursement of shipping costs by credit voucher up to CHF 9.00, depending on the material. Returns due to ordering errors on the part of the buyer will not be reimbursed).
- Ask a question
Pour répondre à toutes les attentes, Vap’Extreme met sur le marché son fil résistif en NI80. Moins résistif que le Kanthal A1, le NI80 offre une réactivité et une longévité impressionnantes. Aussi à l’aise sur un tank que sur un dripper, il fera ressortir les saveurs de vos e-liquides favoris de façon optimale !
Trois versions de ce NI80 sont disponibles :
- 24 Ga (0.51 mm). Bobine de 30 feet (10 m)
- 26 Ga (0.4 mm). Bobine de 30 feet (10 m)
- 28 Ga (0.32 mm). Bobine de 30 feet (10 m)
5 |
|
0 |
4 |
|
0 |
3 |
|
0 |
2 |
|
0 |
1 |
|
0 |
Only logged-in customers who have purchased this product can leave a review.
Related products
Joyetech eRoll Slim 3-cartridge pack
These eRoll Sim cartridges are designed for use with Joyetech's Pen eRoll Slim.
They feature an integrated 0.8 ohm resistor that can accommodate up to 2 ml of e-liquid. A huge advantage is that these cartridges are equipped with a side-filling system to avoid the risk of leaks.
(These cartridges are delivered without a drip tip, so remember to keep the drip tip supplied in the eRoll Slim kit, or add a 510 drip tip of your choice).
In stock
The Vcap cartridge pack is designed for installation on the Pod Trine from Innokin.
These disposable tanks have a capacity of 2 ml, and feature a top-filling system to prevent leaks! Simply unclip the drip tip and add your best e-liquid!
Available in 1.2 ohm for a draw close to that of a traditional cigarette, and in 0.8 ohm for a slightly airier draw.
Two versions are available:
Pack of one 0.8 ohm cartridge.
1.2 ohm cartridge pack.
Pack of 2 replacement cartridges for Doric Q, Doric 20 SE and Doric 20 e-cigarettes from designer Voopoo.
These ITO cartridges are disposable and contain a resistance of 0.70 ohm, 1.0 ohm or 1.2 ohm: all vapoteurs will find the vape that's right for them. Developed with care, these ITO cartridges stand out for their extraordinary strength. To make life easier for electronic cigarette users, VOOPOO has designed a side-filling system.
Aspire's OBY 3-cartridge pack is designed for installation on the OBY Pod! With a capacity of 2 ml and a filling hole positioned underneath, this tank is generous and easy to live with. Aspire's OBY cartridge features an integrated 1.2 ohm resistor, perfect for vaping e-liquids with nicotine salts!
Aspire delivers an easy-to-handle cartridge that allows the OBY pod to express itself fully: Little nuggets!
The pack of two S cartridges is designed to be fitted to the Wenax S3 pod. Resistant, these cartridges can hold up to 2 ml of e-liquid and feature a side-mounted filling system.
These Wenax S3 cartridges keep things simple: the disposable reservoirs contain an integrated resistor, to be replaced when the resistor reaches the end of its life.
Available in 0.8 ohm or 1.2 ohm, these cartridges offer exceptional MTL draw and great flavor!
Kiwi Vapor's 2-pack of Kiwi 2 cartridges are designed for use only with the Pen Kiwi 2. These Kiwi 2 Cartridges are a must-have for all MTL draw enthusiasts. These disposable cartridges hold up to 1.8 ml of e-liquid and feature an ingenious side-filling system.
Kiwi 2 cartridges feature an integrated 0.8 ohm Mesh resistor for a pleasant vaping experience, with rich flavours and generous vapour production for MTL vaping. When the resistor reaches the end of its life, simply replace the entire cartridge (we recommend changing it every two weeks, depending on your usage).
These cartridges come with a range of new features, including a reinforced child safety lock when filling, and "low liquid reminder" technology, which prevents overheating and triggers a vibration on your Pen Kiwi 2 when your tank needs to be filled to avoid unpleasant dry hits!
Kiwi Vapor is aimed at new vapoteurs who want a product that's easy to handle and breathtakingly effective!
Vaporesso's pack of four Luxe Q Corex cartridges is designed for use with Luxe Q and Luxe QS pods. These disposable tanks hold 2 ml and feature bottom-filling. Solid and compatible with the majority of eliquids on the market, these Luxe Q Corex resistors are ideal for enjoying clean flavors and generous vapor.
Vaporesso offers generous, robust cartridges that will delight Luxe Q and Luxe QS owners!
Two versions are available:
Pack of four 0.60 ohm cartridges.
Pack of four 1.0 ohm cartridges.
Joyetech eRoll Slim 3-cartridge pack
These eRoll Sim cartridges are designed for use with Joyetech's Pen eRoll Slim.
They feature an integrated 0.8 ohm resistor that can accommodate up to 2 ml of e-liquid. A huge advantage is that these cartridges are equipped with a side-filling system to avoid the risk of leaks.
(These cartridges are delivered without a drip tip, so remember to keep the drip tip supplied in the eRoll Slim kit, or add a 510 drip tip of your choice).
In stock
The Vcap cartridge pack is designed for installation on the Pod Trine from Innokin.
These disposable tanks have a capacity of 2 ml, and feature a top-filling system to prevent leaks! Simply unclip the drip tip and add your best e-liquid!
Available in 1.2 ohm for a draw close to that of a traditional cigarette, and in 0.8 ohm for a slightly airier draw.
Two versions are available:
Pack of one 0.8 ohm cartridge.
1.2 ohm cartridge pack.
Pack of 2 replacement cartridges for Doric Q, Doric 20 SE and Doric 20 e-cigarettes from designer Voopoo.
These ITO cartridges are disposable and contain a resistance of 0.70 ohm, 1.0 ohm or 1.2 ohm: all vapoteurs will find the vape that's right for them. Developed with care, these ITO cartridges stand out for their extraordinary strength. To make life easier for electronic cigarette users, VOOPOO has designed a side-filling system.
Aspire's OBY 3-cartridge pack is designed for installation on the OBY Pod! With a capacity of 2 ml and a filling hole positioned underneath, this tank is generous and easy to live with. Aspire's OBY cartridge features an integrated 1.2 ohm resistor, perfect for vaping e-liquids with nicotine salts!
Aspire delivers an easy-to-handle cartridge that allows the OBY pod to express itself fully: Little nuggets!
The pack of two S cartridges is designed to be fitted to the Wenax S3 pod. Resistant, these cartridges can hold up to 2 ml of e-liquid and feature a side-mounted filling system.
These Wenax S3 cartridges keep things simple: the disposable reservoirs contain an integrated resistor, to be replaced when the resistor reaches the end of its life.
Available in 0.8 ohm or 1.2 ohm, these cartridges offer exceptional MTL draw and great flavor!
Kiwi Vapor's 2-pack of Kiwi 2 cartridges are designed for use only with the Pen Kiwi 2. These Kiwi 2 Cartridges are a must-have for all MTL draw enthusiasts. These disposable cartridges hold up to 1.8 ml of e-liquid and feature an ingenious side-filling system.
Kiwi 2 cartridges feature an integrated 0.8 ohm Mesh resistor for a pleasant vaping experience, with rich flavours and generous vapour production for MTL vaping. When the resistor reaches the end of its life, simply replace the entire cartridge (we recommend changing it every two weeks, depending on your usage).
These cartridges come with a range of new features, including a reinforced child safety lock when filling, and "low liquid reminder" technology, which prevents overheating and triggers a vibration on your Pen Kiwi 2 when your tank needs to be filled to avoid unpleasant dry hits!
Kiwi Vapor is aimed at new vapoteurs who want a product that's easy to handle and breathtakingly effective!
Vaporesso's pack of four Luxe Q Corex cartridges is designed for use with Luxe Q and Luxe QS pods. These disposable tanks hold 2 ml and feature bottom-filling. Solid and compatible with the majority of eliquids on the market, these Luxe Q Corex resistors are ideal for enjoying clean flavors and generous vapor.
Vaporesso offers generous, robust cartridges that will delight Luxe Q and Luxe QS owners!
Two versions are available:
Pack of four 0.60 ohm cartridges.
Pack of four 1.0 ohm cartridges.
Joyetech eRoll Slim 3-cartridge pack
These eRoll Sim cartridges are designed for use with Joyetech's Pen eRoll Slim.
They feature an integrated 0.8 ohm resistor that can accommodate up to 2 ml of e-liquid. A huge advantage is that these cartridges are equipped with a side-filling system to avoid the risk of leaks.
(These cartridges are delivered without a drip tip, so remember to keep the drip tip supplied in the eRoll Slim kit, or add a 510 drip tip of your choice).
In stock
The Vcap cartridge pack is designed for installation on the Pod Trine from Innokin.
These disposable tanks have a capacity of 2 ml, and feature a top-filling system to prevent leaks! Simply unclip the drip tip and add your best e-liquid!
Available in 1.2 ohm for a draw close to that of a traditional cigarette, and in 0.8 ohm for a slightly airier draw.
Two versions are available:
Pack of one 0.8 ohm cartridge.
1.2 ohm cartridge pack.
Pack of 2 replacement cartridges for Doric Q, Doric 20 SE and Doric 20 e-cigarettes from designer Voopoo.
These ITO cartridges are disposable and contain a resistance of 0.70 ohm, 1.0 ohm or 1.2 ohm: all vapoteurs will find the vape that's right for them. Developed with care, these ITO cartridges stand out for their extraordinary strength. To make life easier for electronic cigarette users, VOOPOO has designed a side-filling system.
Aspire's OBY 3-cartridge pack is designed for installation on the OBY Pod! With a capacity of 2 ml and a filling hole positioned underneath, this tank is generous and easy to live with. Aspire's OBY cartridge features an integrated 1.2 ohm resistor, perfect for vaping e-liquids with nicotine salts!
Aspire delivers an easy-to-handle cartridge that allows the OBY pod to express itself fully: Little nuggets!
Comments
There are currently no product reviews.