Résistance BP Coil
CHF 14.00 TVA inc.
Le pack de 5 résistances BP Aspire est compatible avec la cartouche BP80 du pod BP80 d’Aspire, le clearomiseur Huracan (uniquement 0.15, 0.17 0.3 ohm) les clearomiseurs Finixx Pod Tank et Onixx et les Pods Nautilus Prime X et Boxx ! Les BP coils sont composés de kanthal permettant de restituer d’intenses saveurs et de créer d’imposants nuages de vapeur ! Les résistances élaborées par Aspire offrent également une durée de vie importante : Des coils de haute volée !
Deux versions sont disponibles :
BP Mesh Coil 0.15 ohm à utiliser entre 60 et 80 watts.
BP Mesh 0.17 ohm à utiliser entre 45 et 55 watts.
BP Mesh 0.3 ohm à utiliser entre 30 et 40 watts.
BP Mesh 0.4 ohm à utiliser entre 25 et 35 watts.
BP 0.60 ohm à utiliser à 15 et 25 watts.
- Booster calculator
Nicotine booster calculator for large format e-liquids or DIY bases
Use our shortfill calculator! Enter the volume of your shortfill (in ml) and the number of boosters to be added. Instantly get the total capacity (ml) and the final nicotine rate (mg/ml).ShortfillBoosterResult of your mix20.00 - Delivery & Returns
Delivery
FREE delivery for orders over CHF 50
For all orders under CHF 50, a fixed amount of CHF 9.90 will be charged for transport.
Delivery time: Products will be delivered within a maximum of 24 hours if the order is validated before 11am on the day of dispatch. Average delivery time: 24/48h.
Back
Returns and exchanges
All products purchased on SHIFTERS.CH can be exchanged free of charge or refunded within a maximum of 14 days from the date of purchase.
Return address :
Shifters Lausanne,
SAV Shifters,
Avenue de France 1
1004 Lausanne(Reimbursement of shipping costs by credit voucher up to CHF 9.00, depending on the material. Returns due to ordering errors on the part of the buyer will not be reimbursed).
- Ask a question
Le pack de 5 résistances BP Aspire est compatible avec la cartouche BP80 du pod BP80 d’Aspire, le clearomiseur Huracan (uniquement 0.15, 0.17 0.3 ohm) les clearomiseurs Finixx Pod Tank et Onixx et les Pods Nautilus Prime X et Boxx ! Les BP coils sont composés de kanthal permettant de restituer d’intenses saveurs et de créer d’imposants nuages de vapeur ! Les résistances élaborées par Aspire offrent également une durée de vie importante : Des coils de haute volée !
Two versions are available:
- BP Mesh Coil 0.15 ohm à utiliser entre 60 et 80 watts.
- BP Mesh 0.17 ohm à utiliser entre 45 et 55 watts.
- BP Mesh 0.3 ohm à utiliser entre 30 et 40 watts.
- BP Mesh 0.4 ohm à utiliser entre 25 et 35 watts.
- BP 0.60 ohm à utiliser à 15 et 25 watts.
5 |
|
0 |
4 |
|
0 |
3 |
|
0 |
2 |
|
0 |
1 |
|
0 |
Only logged-in customers who have purchased this product can leave a review.
Related products
Voopoo's 2-pack of Doric Galaxy cartridges are designed for installation on the Doric Galaxy Pen. These disposable cartridges hold up to 2 ml of e-liquid, and feature an ingenious side-filling system. Doric Galaxy cartridges offer excellent flavor reproduction, with built-in 0.7 ohm or 1.2 ohm resistance.
The Nevoks 3-cartridge pack is compatible with Nevoks APX S1 Pods.
They are available in 0.8 ohm and 1.2 ohm.
This 2 ml PCTG magnet cartridge offers you a tighter or looser MTL draw depending on the version chosen.
The 0.8 ohm version is more airy and powerful.
The 1.2 ohm version is pure MTL (tight draw).
For optimum performance, opt for a ratio of at least 50% PG. Filling is from the side, and the direction in which you insert the cartridge will have an impact on airflow.
These cartridges deliver faithful flavor reproduction and excellent vapor production!
Be careful, as the resistors are integrated, you'll need to change your cartridge every 2 weeks or so, depending on your use, or when you feel a burnt cotton taste coming on.
Two versions are available here:
APX S1 0.8 ohm
APX S1 1.2 ohm
Aspire's OBY 3-cartridge pack is designed for installation on the OBY Pod! With a capacity of 2 ml and a filling hole positioned underneath, this tank is generous and easy to live with. Aspire's OBY cartridge features an integrated 1.2 ohm resistor, perfect for vaping e-liquids with nicotine salts!
Aspire delivers an easy-to-handle cartridge that allows the OBY pod to express itself fully: Little nuggets!
Pack of 2 replacement cartridges for Doric Q, Doric 20 SE and Doric 20 e-cigarettes from designer Voopoo.
These ITO cartridges are disposable and contain a resistance of 0.70 ohm, 1.0 ohm or 1.2 ohm: all vapoteurs will find the vape that's right for them. Developed with care, these ITO cartridges stand out for their extraordinary strength. To make life easier for electronic cigarette users, VOOPOO has designed a side-filling system.
The pack of 3 Spark cartridges is designed to be installed on the Kiwi Vapor Pen Spark. Spark cartridges feature an integrated 0.8 or 1.2 ohm mesh resistor, ensuring a draw very close to that of a traditional cigarette! These cartridges can hold up to 2 ml of e-liquid, and are simple to use, with side-filling to prevent leakage.
Pack of 2 replacement cartridges for Voopoo's Doric Q, Doric 20 SE and Doric 20 electronic cigarettes.
These ITO cartridges are designed to accommodate ITO resistors and can hold up to 2 ml of e-liquid. To inject the e-liquid into the tank, VOOPOO has opted for side filling. Robust and easy to handle, these ITO cartridges are the new benchmark for MTL enthusiasts.
Please note that these cartridges are sold without resistance!
In stock
The voopoo PNP MTL cartridge is designed to fit voopoo pods and tank adapters for tight use. This PCTG tank can hold up to 2 ml of e-liquid.
The cartridge is particularly sturdy and easy to use, thanks to its bottom-filling system. Sold in packs of 2.
A cartridge suitable for the Drag Max, Drag S, Drag X, Argus pro, Seal and VSuit kits.
In stock
Voopoo's 2-pack of Doric Galaxy cartridges are designed for installation on the Doric Galaxy Pen. These disposable cartridges hold up to 2 ml of e-liquid, and feature an ingenious side-filling system. Doric Galaxy cartridges offer excellent flavor reproduction, with built-in 0.7 ohm or 1.2 ohm resistance.
The Nevoks 3-cartridge pack is compatible with Nevoks APX S1 Pods.
They are available in 0.8 ohm and 1.2 ohm.
This 2 ml PCTG magnet cartridge offers you a tighter or looser MTL draw depending on the version chosen.
The 0.8 ohm version is more airy and powerful.
The 1.2 ohm version is pure MTL (tight draw).
For optimum performance, opt for a ratio of at least 50% PG. Filling is from the side, and the direction in which you insert the cartridge will have an impact on airflow.
These cartridges deliver faithful flavor reproduction and excellent vapor production!
Be careful, as the resistors are integrated, you'll need to change your cartridge every 2 weeks or so, depending on your use, or when you feel a burnt cotton taste coming on.
Two versions are available here:
APX S1 0.8 ohm
APX S1 1.2 ohm
Aspire's OBY 3-cartridge pack is designed for installation on the OBY Pod! With a capacity of 2 ml and a filling hole positioned underneath, this tank is generous and easy to live with. Aspire's OBY cartridge features an integrated 1.2 ohm resistor, perfect for vaping e-liquids with nicotine salts!
Aspire delivers an easy-to-handle cartridge that allows the OBY pod to express itself fully: Little nuggets!
Pack of 2 replacement cartridges for Doric Q, Doric 20 SE and Doric 20 e-cigarettes from designer Voopoo.
These ITO cartridges are disposable and contain a resistance of 0.70 ohm, 1.0 ohm or 1.2 ohm: all vapoteurs will find the vape that's right for them. Developed with care, these ITO cartridges stand out for their extraordinary strength. To make life easier for electronic cigarette users, VOOPOO has designed a side-filling system.
The pack of 3 Spark cartridges is designed to be installed on the Kiwi Vapor Pen Spark. Spark cartridges feature an integrated 0.8 or 1.2 ohm mesh resistor, ensuring a draw very close to that of a traditional cigarette! These cartridges can hold up to 2 ml of e-liquid, and are simple to use, with side-filling to prevent leakage.
Pack of 2 replacement cartridges for Voopoo's Doric Q, Doric 20 SE and Doric 20 electronic cigarettes.
These ITO cartridges are designed to accommodate ITO resistors and can hold up to 2 ml of e-liquid. To inject the e-liquid into the tank, VOOPOO has opted for side filling. Robust and easy to handle, these ITO cartridges are the new benchmark for MTL enthusiasts.
Please note that these cartridges are sold without resistance!
In stock
The voopoo PNP MTL cartridge is designed to fit voopoo pods and tank adapters for tight use. This PCTG tank can hold up to 2 ml of e-liquid.
The cartridge is particularly sturdy and easy to use, thanks to its bottom-filling system. Sold in packs of 2.
A cartridge suitable for the Drag Max, Drag S, Drag X, Argus pro, Seal and VSuit kits.
In stock
Voopoo's 2-pack of Doric Galaxy cartridges are designed for installation on the Doric Galaxy Pen. These disposable cartridges hold up to 2 ml of e-liquid, and feature an ingenious side-filling system. Doric Galaxy cartridges offer excellent flavor reproduction, with built-in 0.7 ohm or 1.2 ohm resistance.
The Nevoks 3-cartridge pack is compatible with Nevoks APX S1 Pods.
They are available in 0.8 ohm and 1.2 ohm.
This 2 ml PCTG magnet cartridge offers you a tighter or looser MTL draw depending on the version chosen.
The 0.8 ohm version is more airy and powerful.
The 1.2 ohm version is pure MTL (tight draw).
For optimum performance, opt for a ratio of at least 50% PG. Filling is from the side, and the direction in which you insert the cartridge will have an impact on airflow.
These cartridges deliver faithful flavor reproduction and excellent vapor production!
Be careful, as the resistors are integrated, you'll need to change your cartridge every 2 weeks or so, depending on your use, or when you feel a burnt cotton taste coming on.
Two versions are available here:
APX S1 0.8 ohm
APX S1 1.2 ohm
Aspire's OBY 3-cartridge pack is designed for installation on the OBY Pod! With a capacity of 2 ml and a filling hole positioned underneath, this tank is generous and easy to live with. Aspire's OBY cartridge features an integrated 1.2 ohm resistor, perfect for vaping e-liquids with nicotine salts!
Aspire delivers an easy-to-handle cartridge that allows the OBY pod to express itself fully: Little nuggets!
Pack of 2 replacement cartridges for Doric Q, Doric 20 SE and Doric 20 e-cigarettes from designer Voopoo.
These ITO cartridges are disposable and contain a resistance of 0.70 ohm, 1.0 ohm or 1.2 ohm: all vapoteurs will find the vape that's right for them. Developed with care, these ITO cartridges stand out for their extraordinary strength. To make life easier for electronic cigarette users, VOOPOO has designed a side-filling system.
Comments
There are currently no product reviews.