Résistance SPL 10 Nevoks
CHF 13.50 TVA inc.
Le pack de 5 résistances SPL 10 de chez Nevoks sont compatibles avec les Pods Feelin, Feelin Mini, Feelin C1, Feelin X et Pagee de la marque Nevoks.
Elles sont disponibles en 0.3 ohm (à utiliser uniquement avec le pod Feelin X), 0.6 ohm, 0.8 ohm et 1.0 ohm.
Ces résistances SPL 10 permettent de profiter d’une fidèle restitution des saveurs et une très bonne production de vapeur !
Deux versions sont disponibles ici :
SPL 10 de 0.8 ohm à utiliser entre 15 et 18 watts
SPL 10 de 0.3 ohm à utiliser entre 35 et 45 watts
- Booster calculator
Nicotine booster calculator for large format e-liquids or DIY bases
Use our shortfill calculator! Enter the volume of your shortfill (in ml) and the number of boosters to be added. Instantly get the total capacity (ml) and the final nicotine rate (mg/ml).ShortfillBoosterResult of your mix20.00 - Delivery & Returns
Delivery
FREE delivery for orders over CHF 50
For all orders under CHF 50, a fixed amount of CHF 9.90 will be charged for transport.
Delivery time: Products will be delivered within a maximum of 24 hours if the order is validated before 11am on the day of dispatch. Average delivery time: 24/48h.
Back
Returns and exchanges
All products purchased on SHIFTERS.CH can be exchanged free of charge or refunded within a maximum of 14 days from the date of purchase.
Return address :
Shifters Lausanne,
SAV Shifters,
Avenue de France 1
1004 Lausanne(Reimbursement of shipping costs by credit voucher up to CHF 9.00, depending on the material. Returns due to ordering errors on the part of the buyer will not be reimbursed).
- Ask a question
Le pack de 5 résistances SPL 10 de chez Nevoks sont compatibles avec les Pods Feelin, Feelin Mini, Feelin C1, Feelin X et Pagee de la marque Nevoks.
Elles sont disponibles en 0.3 ohm (à utiliser uniquement avec le pod Feelin X), 0.6 ohm, 0.8 ohm et 1.0 ohm.
Ces résistances SPL 10 permettent de profiter d’une fidèle restitution des saveurs et une très bonne production de vapeur !
Deux versions sont disponibles ici :
- SPL 10 de 0.8 ohm à utiliser entre 15 et 18 watts
- SPL 10 de 0.3 ohm à utiliser entre 35 et 45 watts
5 |
|
0 |
4 |
|
0 |
3 |
|
0 |
2 |
|
0 |
1 |
|
0 |
Only logged-in customers who have purchased this product can leave a review.
Related products
Innokin's Sceptre cartridge is designed to fit the Sceptre pod. This PCTG tank holds 3 ml of e-liquid and features an ingenious adjustable airflow. Thanks to the markings on the cartridge, you can switch from MTL to RDL vape.
Innokin's Sceptre cartridge is particularly sturdy and easy to use, thanks to its side-filling system.
Out of stock
The Vcap cartridge pack is designed for installation on the Pod Trine from Innokin.
These disposable tanks have a capacity of 2 ml, and feature a top-filling system to prevent leaks! Simply unclip the drip tip and add your best e-liquid!
Available in 1.2 ohm for a draw close to that of a traditional cigarette, and in 0.8 ohm for a slightly airier draw.
Two versions are available:
Pack of one 0.8 ohm cartridge.
1.2 ohm cartridge pack.
Wenax M1 Geekvape cartridge
The pack of 3 Wenax M1 Filter cartridges is designed to be fitted to the Wenax M1 pod. Resistant, these cartridges can hold up to 2 ml of e-liquid and feature a clever filling system on the side. Equipped with a filter that ensures a tight draw, close to your old addiction, Wenax M1 cartridges can hold 2 ml of liquid.
Vaporesso Luxe XR empty cartridges
Pack of 2 replacement cartridges for the Luxe XR Max, Luxe XR and Luxe X pod from Vaporesso. These Luxe XR cartridges are designed to accommodate GTX resistors and can hold up to 5 ml of e-liquid.
They are available for MTL, RDL or DTL draw. The first version ensures a tight draw, while the second and final option allows you to take full advantage of an airy vape.
Pack of 2 replacement cartridges for Voopoo's Doric Q, Doric 20 SE and Doric 20 electronic cigarettes.
These ITO cartridges are designed to accommodate ITO resistors and can hold up to 2 ml of e-liquid. To inject the e-liquid into the tank, VOOPOO has opted for side filling. Robust and easy to handle, these ITO cartridges are the new benchmark for MTL enthusiasts.
Please note that these cartridges are sold without resistance!
In stock
The Soul two-cartridge pack is designed for installation on the Geekvape Soul Pod. These cartridges can hold up to 4 ml of e-liquid and feature a clever side-mounted filling system. You'll also find an adjustable airflow on top of the cartridge.
These disposable tanks contain an integrated resistor and should be replaced when the resistor reaches the end of its life.
These cartridges are designed for use with the Pod Re1 Da One.
The 3-pack of disposable Rever cartridges can hold up to 2ml of e-liquid and feature a clever side-filling system.
Rever cartridges feature an integrated 0.8 or 1.2 ohm resistor and guarantee a draw very similar to that of a conventional cigarette, to ensure smooth weaning without disturbing your habits. The 0.8 ohm cartridge offers a slightly more open draw, and the 1.0 ohm cartridge a tighter draw.
When the resistor reaches the end of its life, simply replace the entire cartridge.
Recommended liquids per resistor:
0.8 Ohm: 50PG/50VG or VG less than 50% (nicotine salts)
1.2 Ohm: 50PG/50VG or VG over 50% (nicotine salts)
Innokin's Sceptre cartridge is designed to fit the Sceptre pod. This PCTG tank holds 3 ml of e-liquid and features an ingenious adjustable airflow. Thanks to the markings on the cartridge, you can switch from MTL to RDL vape.
Innokin's Sceptre cartridge is particularly sturdy and easy to use, thanks to its side-filling system.
Out of stock
The Vcap cartridge pack is designed for installation on the Pod Trine from Innokin.
These disposable tanks have a capacity of 2 ml, and feature a top-filling system to prevent leaks! Simply unclip the drip tip and add your best e-liquid!
Available in 1.2 ohm for a draw close to that of a traditional cigarette, and in 0.8 ohm for a slightly airier draw.
Two versions are available:
Pack of one 0.8 ohm cartridge.
1.2 ohm cartridge pack.
Wenax M1 Geekvape cartridge
The pack of 3 Wenax M1 Filter cartridges is designed to be fitted to the Wenax M1 pod. Resistant, these cartridges can hold up to 2 ml of e-liquid and feature a clever filling system on the side. Equipped with a filter that ensures a tight draw, close to your old addiction, Wenax M1 cartridges can hold 2 ml of liquid.
Vaporesso Luxe XR empty cartridges
Pack of 2 replacement cartridges for the Luxe XR Max, Luxe XR and Luxe X pod from Vaporesso. These Luxe XR cartridges are designed to accommodate GTX resistors and can hold up to 5 ml of e-liquid.
They are available for MTL, RDL or DTL draw. The first version ensures a tight draw, while the second and final option allows you to take full advantage of an airy vape.
Pack of 2 replacement cartridges for Voopoo's Doric Q, Doric 20 SE and Doric 20 electronic cigarettes.
These ITO cartridges are designed to accommodate ITO resistors and can hold up to 2 ml of e-liquid. To inject the e-liquid into the tank, VOOPOO has opted for side filling. Robust and easy to handle, these ITO cartridges are the new benchmark for MTL enthusiasts.
Please note that these cartridges are sold without resistance!
In stock
The Soul two-cartridge pack is designed for installation on the Geekvape Soul Pod. These cartridges can hold up to 4 ml of e-liquid and feature a clever side-mounted filling system. You'll also find an adjustable airflow on top of the cartridge.
These disposable tanks contain an integrated resistor and should be replaced when the resistor reaches the end of its life.
These cartridges are designed for use with the Pod Re1 Da One.
The 3-pack of disposable Rever cartridges can hold up to 2ml of e-liquid and feature a clever side-filling system.
Rever cartridges feature an integrated 0.8 or 1.2 ohm resistor and guarantee a draw very similar to that of a conventional cigarette, to ensure smooth weaning without disturbing your habits. The 0.8 ohm cartridge offers a slightly more open draw, and the 1.0 ohm cartridge a tighter draw.
When the resistor reaches the end of its life, simply replace the entire cartridge.
Recommended liquids per resistor:
0.8 Ohm: 50PG/50VG or VG less than 50% (nicotine salts)
1.2 Ohm: 50PG/50VG or VG over 50% (nicotine salts)
Innokin's Sceptre cartridge is designed to fit the Sceptre pod. This PCTG tank holds 3 ml of e-liquid and features an ingenious adjustable airflow. Thanks to the markings on the cartridge, you can switch from MTL to RDL vape.
Innokin's Sceptre cartridge is particularly sturdy and easy to use, thanks to its side-filling system.
Out of stock
The Vcap cartridge pack is designed for installation on the Pod Trine from Innokin.
These disposable tanks have a capacity of 2 ml, and feature a top-filling system to prevent leaks! Simply unclip the drip tip and add your best e-liquid!
Available in 1.2 ohm for a draw close to that of a traditional cigarette, and in 0.8 ohm for a slightly airier draw.
Two versions are available:
Pack of one 0.8 ohm cartridge.
1.2 ohm cartridge pack.
Wenax M1 Geekvape cartridge
The pack of 3 Wenax M1 Filter cartridges is designed to be fitted to the Wenax M1 pod. Resistant, these cartridges can hold up to 2 ml of e-liquid and feature a clever filling system on the side. Equipped with a filter that ensures a tight draw, close to your old addiction, Wenax M1 cartridges can hold 2 ml of liquid.
Vaporesso Luxe XR empty cartridges
Pack of 2 replacement cartridges for the Luxe XR Max, Luxe XR and Luxe X pod from Vaporesso. These Luxe XR cartridges are designed to accommodate GTX resistors and can hold up to 5 ml of e-liquid.
They are available for MTL, RDL or DTL draw. The first version ensures a tight draw, while the second and final option allows you to take full advantage of an airy vape.
Comments
There are currently no product reviews.