Résistance Tigon Aspire
CHF 14.00 - CHF 15.00 TVA inc.
Pack de 5 résistances de la marque Aspire, compatibles avec le clearomiseur Tigon 2ml, le Tigon 3.5 ml et le Pod Tigon Aio.
Ces résistances se démarquent par leur durée de vie conséquente et offrent un très bon rendu des saveurs, sans altérer la production de vapeur. La résistance de 1.2 ohm est compatible avec les liquides aux sels de nicotine.
Trois versions sont disponibles :
0.4 ohm à utiliser entre 23 et 28 watts
1.2 ohm à utiliser entre 10 et 12 watts
Mesh de 0.7 ohm à utiliser entre 20 et 25 watts
- Booster calculator
Nicotine booster calculator for large format e-liquids or DIY bases
Use our shortfill calculator! Enter the volume of your shortfill (in ml) and the number of boosters to be added. Instantly get the total capacity (ml) and the final nicotine rate (mg/ml).ShortfillBoosterResult of your mix0.00 - Delivery & Returns
Delivery
FREE delivery for orders over CHF 50
For all orders under CHF 50, a fixed amount of CHF 9.90 will be charged for transport.
Delivery time: Products will be delivered within a maximum of 24 hours if the order is validated before 11am on the day of dispatch. Average delivery time: 24/48h.
Back
Returns and exchanges
All products purchased on SHIFTERS.CH can be exchanged free of charge or refunded within a maximum of 14 days from the date of purchase.
Return address :
Shifters Lausanne,
SAV Shifters,
Avenue de France 1
1004 Lausanne(Reimbursement of shipping costs by credit voucher up to CHF 9.00, depending on the material. Returns due to ordering errors on the part of the buyer will not be reimbursed).
- Ask a question
Pack de 5 résistances de la marque Aspire, compatibles avec le clearomiseur Tigon 2ml, le Tigon 3.5 ml et le Pod Tigon Aio.
Ces résistances se démarquent par leur durée de vie conséquente et offrent un très bon rendu des saveurs, sans altérer la production de vapeur. La résistance de 1.2 ohm est compatible avec les liquides aux sels de nicotine.
Trois versions sont disponibles :
- 0.4 ohm à utiliser entre 23 et 28 watts
- 1.2 ohm à utiliser entre 10 et 12 watts
- Mesh de 0.7 ohm à utiliser entre 20 et 25 watts
5 |
|
0 |
4 |
|
0 |
3 |
|
0 |
2 |
|
0 |
1 |
|
0 |
Only logged-in customers who have purchased this product can leave a review.
Related products
Pack of 2 replacement cartridges for Voopoo's Doric Q, Doric 20 SE and Doric 20 electronic cigarettes.
These ITO cartridges are designed to accommodate ITO resistors and can hold up to 2 ml of e-liquid. To inject the e-liquid into the tank, VOOPOO has opted for side filling. Robust and easy to handle, these ITO cartridges are the new benchmark for MTL enthusiasts.
Please note that these cartridges are sold without resistance!
In stock
Designed for use with Kiwi Vapor's Pod Kiwi Pen, the Kiwi 3-pack cartridge is a must-have for all MTL enthusiasts. Kiwi Vapor's disposable cartridges hold up to 1.7 ml of eliquid, and feature a clever side-filling system.
Kiwi cartridges contain a 1.2 ohm resistor to ensure faithful flavor reproduction and moderate eliquid consumption. When the resistor reaches the end of its life, simply replace the entire cartridge.
Kiwi Vapor is aimed at new vapoteurs who want a product that's easy to handle and highly effective!
Avocado Baby Vaptio cartridges
This pack of three cartridges is designed for use with Vaptio's Avocado Baby. The 2ml Avocado Baby cartridge will make your life easier, as you'll be able to change e-liquid very easily! Two versions are available: 0.7 ohm or 1.2 ohm resistance.
Wenax M1 Geekvape cartridge
The pack of 3 Wenax M1 Filter cartridges is designed to be fitted to the Wenax M1 pod. Resistant, these cartridges can hold up to 2 ml of e-liquid and feature a clever filling system on the side. Equipped with a filter that ensures a tight draw, close to your old addiction, Wenax M1 cartridges can hold 2 ml of liquid.
These cartridges are designed for use with the Pod Re1 Da One.
The 3-pack of disposable Rever cartridges can hold up to 2ml of e-liquid and feature a clever side-filling system.
Rever cartridges feature an integrated 0.8 or 1.2 ohm resistor and guarantee a draw very similar to that of a conventional cigarette, to ensure smooth weaning without disturbing your habits. The 0.8 ohm cartridge offers a slightly more open draw, and the 1.0 ohm cartridge a tighter draw.
When the resistor reaches the end of its life, simply replace the entire cartridge.
Recommended liquids per resistor:
0.8 Ohm: 50PG/50VG or VG less than 50% (nicotine salts)
1.2 Ohm: 50PG/50VG or VG over 50% (nicotine salts)
The 2-pack of Nexus cartridges from Lost Vape are designed for installation on the Thelema Nexus Pen. These disposable cartridges hold up to 2 ml of e-liquid and feature a side-filling system.
Doric Galaxy cartridges feature a built-in 0.8 ohm resistor for excellent flavor reproduction. This guarantees an MTL (slightly airy) draw.
In stock
Voopoo's 2-pack of Doric Galaxy cartridges are designed for installation on the Doric Galaxy Pen. These disposable cartridges hold up to 2 ml of e-liquid, and feature an ingenious side-filling system. Doric Galaxy cartridges offer excellent flavor reproduction, with built-in 0.7 ohm or 1.2 ohm resistance.
Comments
There are currently no product reviews.