NI80 Vap'Extreme
CHF 8.00 TVA inc.
To meet all expectations, Vap'Extreme has launched its NI80 resistive thread. Less resistive than Kanthal A1, NI80 offers impressive responsiveness and longevity. Equally at home on a tank or a dripper, it will bring out the flavors of your favorite e-liquids to perfection!
Three versions of the NI80 are available:
24 Ga (0.51 mm). 30 feet (10 m) spool
26 Ga (0.4 mm). 30 feet (10 m) coil
28 Ga (0.32 mm). 30 feet (10 m) coil
- Booster calculator
Nicotine booster calculator for large format e-liquids or DIY bases
Use our shortfill calculator! Enter the volume of your shortfill (in ml) and the number of boosters to be added. Instantly get the total capacity (ml) and the final nicotine rate (mg/ml).ShortfillBoosterResult of your mix20.00 - Delivery & Returns
Delivery
FREE delivery for orders over CHF 50
For all orders under CHF 50, a fixed amount of CHF 9.90 will be charged for transport.
Delivery time: Products will be delivered within a maximum of 24 hours if the order is validated before 11am on the day of dispatch. Average delivery time: 24/48h.
Back
Returns and exchanges
All products purchased on SHIFTERS.CH can be exchanged free of charge or refunded within a maximum of 14 days from the date of purchase.
Return address :
Shifters Lausanne,
SAV Shifters,
Avenue de France 1
1004 Lausanne(Reimbursement of shipping costs by credit voucher up to CHF 9.00, depending on the material. Returns due to ordering errors on the part of the buyer will not be reimbursed).
- Ask a question
Pour répondre à toutes les attentes, Vap’Extreme met sur le marché son fil résistif en NI80. Moins résistif que le Kanthal A1, le NI80 offre une réactivité et une longévité impressionnantes. Aussi à l’aise sur un tank que sur un dripper, il fera ressortir les saveurs de vos e-liquides favoris de façon optimale !
Trois versions de ce NI80 sont disponibles :
- 24 Ga (0.51 mm). Bobine de 30 feet (10 m)
- 26 Ga (0.4 mm). Bobine de 30 feet (10 m)
- 28 Ga (0.32 mm). Bobine de 30 feet (10 m)
5 |
|
0 |
4 |
|
0 |
3 |
|
0 |
2 |
|
0 |
1 |
|
0 |
Only logged-in customers who have purchased this product can leave a review.
Related products
The 2-pack of Nexus cartridges from Lost Vape are designed for installation on the Thelema Nexus Pen. These disposable cartridges hold up to 2 ml of e-liquid and feature a side-filling system.
Doric Galaxy cartridges feature a built-in 0.8 ohm resistor for excellent flavor reproduction. This guarantees an MTL (slightly airy) draw.
Out of stock
The voopoo PNP MTL cartridge is designed to fit voopoo pods and tank adapters for tight use. This PCTG tank can hold up to 2 ml of e-liquid.
The cartridge is particularly sturdy and easy to use, thanks to its bottom-filling system. Sold in packs of 2.
A cartridge suitable for the Drag Max, Drag S, Drag X, Argus pro, Seal and VSuit kits.
In stock
Pack of 2 replacement cartridges for Doric Q, Doric 20 SE and Doric 20 e-cigarettes from designer Voopoo.
These ITO cartridges are disposable and contain a resistance of 0.70 ohm, 1.0 ohm or 1.2 ohm: all vapoteurs will find the vape that's right for them. Developed with care, these ITO cartridges stand out for their extraordinary strength. To make life easier for electronic cigarette users, VOOPOO has designed a side-filling system.
Innokin's Sceptre cartridge is designed to fit the Sceptre pod. This PCTG tank holds 3 ml of e-liquid and features an ingenious adjustable airflow. Thanks to the markings on the cartridge, you can switch from MTL to RDL vape.
Innokin's Sceptre cartridge is particularly sturdy and easy to use, thanks to its side-filling system.
Out of stock
Vaporesso's pack of four Luxe Q Corex cartridges is designed for use with Luxe Q and Luxe QS pods. These disposable tanks hold 2 ml and feature bottom-filling. Solid and compatible with the majority of eliquids on the market, these Luxe Q Corex resistors are ideal for enjoying clean flavors and generous vapor.
Vaporesso offers generous, robust cartridges that will delight Luxe Q and Luxe QS owners!
Two versions are available:
Pack of four 0.60 ohm cartridges.
Pack of four 1.0 ohm cartridges.
Aspire's OBY 3-cartridge pack is designed for installation on the OBY Pod! With a capacity of 2 ml and a filling hole positioned underneath, this tank is generous and easy to live with. Aspire's OBY cartridge features an integrated 1.2 ohm resistor, perfect for vaping e-liquids with nicotine salts!
Aspire delivers an easy-to-handle cartridge that allows the OBY pod to express itself fully: Little nuggets!
Innokin's Sceptre 2 cartridge is compatible with the Sceptre 2 pod! It features a 3-ml reservoir with adjustable airflow. This is located on the side of the pod, and you simply raise or lower the notched knob to open or restrict the airflow.
In stock
The 2-pack of Nexus cartridges from Lost Vape are designed for installation on the Thelema Nexus Pen. These disposable cartridges hold up to 2 ml of e-liquid and feature a side-filling system.
Doric Galaxy cartridges feature a built-in 0.8 ohm resistor for excellent flavor reproduction. This guarantees an MTL (slightly airy) draw.
Out of stock
The voopoo PNP MTL cartridge is designed to fit voopoo pods and tank adapters for tight use. This PCTG tank can hold up to 2 ml of e-liquid.
The cartridge is particularly sturdy and easy to use, thanks to its bottom-filling system. Sold in packs of 2.
A cartridge suitable for the Drag Max, Drag S, Drag X, Argus pro, Seal and VSuit kits.
In stock
Pack of 2 replacement cartridges for Doric Q, Doric 20 SE and Doric 20 e-cigarettes from designer Voopoo.
These ITO cartridges are disposable and contain a resistance of 0.70 ohm, 1.0 ohm or 1.2 ohm: all vapoteurs will find the vape that's right for them. Developed with care, these ITO cartridges stand out for their extraordinary strength. To make life easier for electronic cigarette users, VOOPOO has designed a side-filling system.
Innokin's Sceptre cartridge is designed to fit the Sceptre pod. This PCTG tank holds 3 ml of e-liquid and features an ingenious adjustable airflow. Thanks to the markings on the cartridge, you can switch from MTL to RDL vape.
Innokin's Sceptre cartridge is particularly sturdy and easy to use, thanks to its side-filling system.
Out of stock
Vaporesso's pack of four Luxe Q Corex cartridges is designed for use with Luxe Q and Luxe QS pods. These disposable tanks hold 2 ml and feature bottom-filling. Solid and compatible with the majority of eliquids on the market, these Luxe Q Corex resistors are ideal for enjoying clean flavors and generous vapor.
Vaporesso offers generous, robust cartridges that will delight Luxe Q and Luxe QS owners!
Two versions are available:
Pack of four 0.60 ohm cartridges.
Pack of four 1.0 ohm cartridges.
Aspire's OBY 3-cartridge pack is designed for installation on the OBY Pod! With a capacity of 2 ml and a filling hole positioned underneath, this tank is generous and easy to live with. Aspire's OBY cartridge features an integrated 1.2 ohm resistor, perfect for vaping e-liquids with nicotine salts!
Aspire delivers an easy-to-handle cartridge that allows the OBY pod to express itself fully: Little nuggets!
Innokin's Sceptre 2 cartridge is compatible with the Sceptre 2 pod! It features a 3-ml reservoir with adjustable airflow. This is located on the side of the pod, and you simply raise or lower the notched knob to open or restrict the airflow.
In stock
The 2-pack of Nexus cartridges from Lost Vape are designed for installation on the Thelema Nexus Pen. These disposable cartridges hold up to 2 ml of e-liquid and feature a side-filling system.
Doric Galaxy cartridges feature a built-in 0.8 ohm resistor for excellent flavor reproduction. This guarantees an MTL (slightly airy) draw.
Out of stock
The voopoo PNP MTL cartridge is designed to fit voopoo pods and tank adapters for tight use. This PCTG tank can hold up to 2 ml of e-liquid.
The cartridge is particularly sturdy and easy to use, thanks to its bottom-filling system. Sold in packs of 2.
A cartridge suitable for the Drag Max, Drag S, Drag X, Argus pro, Seal and VSuit kits.
In stock
Pack of 2 replacement cartridges for Doric Q, Doric 20 SE and Doric 20 e-cigarettes from designer Voopoo.
These ITO cartridges are disposable and contain a resistance of 0.70 ohm, 1.0 ohm or 1.2 ohm: all vapoteurs will find the vape that's right for them. Developed with care, these ITO cartridges stand out for their extraordinary strength. To make life easier for electronic cigarette users, VOOPOO has designed a side-filling system.
Innokin's Sceptre cartridge is designed to fit the Sceptre pod. This PCTG tank holds 3 ml of e-liquid and features an ingenious adjustable airflow. Thanks to the markings on the cartridge, you can switch from MTL to RDL vape.
Innokin's Sceptre cartridge is particularly sturdy and easy to use, thanks to its side-filling system.
Out of stock
Comments
There are currently no product reviews.